This report is the result of a degree project in building engineering, at an advanced level. The project evaluated a building from a technical and historical point of view, and focused on its energy consumption, particularly the energy used for heating. The building in question was a small apartment building in Strömsholm, Sweden. It was made in 1902, from vertical logs, a not so common form of the traditional log house. The goal of the project was to evaluate if the energy consumption could be reduced in accordance with building preservation regulations, that is without damaging any of the building?s cultural or historical values.The building was surveyed with the help of archive and literature studies, interviews and inspections.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

This study was made for the Swedish forest company Sveaskog because the sawmills they delivered timber to had noticed a high frequency of bucking splits in their products. Coworker Jim Edström at Sveaskog also wanted to know if there was a big difference between different felling heads. The purpose with this study has been to find out the amount of bucking splits and if there is any felling head brand that did a bigger damage that the others. The study was made in two steps, where the first part was a literary review to find out results and conclusions in earlier studies. The best measuring method to check bucking splits was the known ?trissmetoden?.

The purpose of my independent work was to develop and test a task-specific assessment matrix to the students writing logs that occurs in connection with their APL (workplace-based learning). The matrix is based on upper secondary school subject plan House building from The Swedish National Agency for Education and the four courses House building process, House building 1, House building 2 and House building 3 - conversion. Due to the matrix structure, I used the example matrix of Malmö University. The task-specific assessment must both serve as a guide for students in the implementation of the log writing, and in the evaluation of the assessment work. Both students and teachers then get a common assessment tool for evaluation.

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

The aim of this thesis was to analyse BARO WOOD AB:s timber measuring and quality sorting and to evaluate the analyse program Stockholmen. The purpose was to get a better understanding for the quality sorting made at BARO WOOD AB today, analyse differences in center board quality from logs with a good quality and logs with a bad quality, suggest new sorting criterias developed from analyses made with Stockholmen and to evaluate the program Stockholmen. All analyses are based on data gathered in a test sawing made at BARO WOOD AB in June and July 2002. The test sawing was made on four different diameter classes and every diameter class consisted out of A or M-grade logs, with a better quality, and B-grade logs with a lesser quality. The logs where sorted out with BARO WOOD AB:s existing quality criterias.

Utifrån varumärkesteorier undersöka vilka konsekvenser H&M´s beslut att lansera sitt nya varumärke COS som ett fristående varumärke utan någon synlig koppling till H&M har haft på konsumenternas uppfattning om varumärkena. Vi dragit slutsatsen att konsumenterna påverkas positivt av H&M´s val att övergå till ett House of Brands och lansera COS som ett fristående varumärke. Den osynliga, men samtidigt tydliga kopplingen är en viktig framgångsfaktor..

This essay concerns the interpretation of house plans in three-aisled longhouses and hall-buildings, in Scandinavia during Iron Age. Full scale house reconstructions need a better basis of interpretations to understand the patterns of roof supporting post holes in excavated house plans. This has led to the thesis, presented here, that the layout of house plans during Iron Age is based on geometrical proportions. In order to prove this, geometric house plans were applied and compared with excavated house plans in 11different case studies, including the fortification of Fyrkat Denmark. It was found that all house plans in the case studies indicate, that the geometrical proportions 1:2, 1:3 and 2:3 of a given circle must have been used for the basic layout of the roof supporting post holes, using a compass and a straightedge.

In connection with the property crises in many countries, caused by the financial crises, people are now more aware of the risks involved in poor property-investments. The unusually cold winters along with extreme prices of electricity in Sweden in recent years has also contributed to increased interest in energy-efficient buildings.The process of developing a modern family home in Kiruna, Sweden is presented the first part of this paper. The house has been designed to withstand very high stresses from snow, low energy consumption as well as a high standard of living comfort. Aspects of the house covered here involves everything from construction, heating and ventilation to sanitation. Each of these areas is presented based on their underlying, scientific methods or theories.

All new households were to be constructed with "near zero energy house standards" (NZE-house) by the year of 2020. The ambition to construct energy-efficient buildings had to increase rapidly in the spring of 2013.The purpose of this report was to increase the interest for building contractors to construct apartment buildings with passive house standards. By locating and evaluating experiences from an existing passive house a case study including interviews, field visits and document analysis was made. Research of literature regarding other passive houses in Sweden also helped to answer the following questions:- What positive and negative experiences have the study of the passive house meant to the involved stakeholders and residents?- What improvements can be made based on identified experiences?- How can an apartment building be designed as a passive house based on possible improvements?By collecting good and bad experiences, as well as improvements and potential design proposals, a diagram was created designed as a tool for developers when constructing apartment buildings with passive house standards.

The Results of this thesis was the creation of two designed house variants with a module toall the apartments. In addition till the first module there are three other modules ofapartments that can be put in the houses if it so needs. The house are volume prefabricatedand are placed on site in a way that it create an enclosure of the area which faces against thenature and car parks also lies hidden behind these houses.For the actual structure, a cross beam was created to carry the floor above and it is supportby all four walls. The structure between the first and the second floor has no "syll" butinstead there are two differently alternative to linking the floors in order so that it will notmove. The reason with this solution was that there will not be any subsidence when theforces from above are pressed down ward.

The aim of this thesis is to find a statistical model that sort logs according to a predicted modulus of elasticity on the sawn boards. The input parameters for the model are X-ray variables from an X-ray scanner. For some of the log classes sawn at the sawmill it is desirable to have a narrow distribution of modulus of elasticity on the sawn boards. 250 pine logs from five different diameter classes were numbered and followed through the sawmill process. Log data were collected from X-ray and 3-D scanners in the log intake.

The purpose of this thesis is to find evidence if cult houses existed on Gotland during the Bronze Age. The cult house is a common term in modern Bronze Age archaeology and the general definitions of cult house are discussed and why cult houses seem to be absent on Gotland. In this thesis the cult house are discussed as a phenomenon, and the possibilities to find Bronze Age cult houses on Gotland are evaluated by making comparisons between Gotland houses with already defined cult houses from the Swedish mainland. Some known cult houses are presented in more detail as case studies, together with house remains on Gotland which could have potential to be defined as cult houses..

In this essay, we have compared a conventional house to a passive house. The housesshared the same local conditions; they have the same living area and the same layout. Thedifferences between the houses were the different construction solutions for the roof, theouter walls, the floor and the heating system. Both the houses qualify the standards fromBBR and the passive house also lives up to FEBY?s special conditions.The purpose with the essay was to examine if it really is profitable to build small hoses aspassive houses.

In this essay I aim to examine how the landscape of Mönsterås might have looked like during the Bronze age in order to get a better understanding of the house urn that C J Ekerot found in a cairn in Fälle. Mönsterås is an area which has a quality of permanence, from Stone Age to Iron Age with its culmination during the Bronze Age. I will discuss the use and symbolic meaning of the house urn. The house as a symbol during the Bronze Age seemed to have had an important place in the cosmology. I will also discuss the importance of cairns, especially in the archipelago areas.